The system ONDUTHERM® WALL is a innovative solution for insulation for cladding and interior partitioning with which improve technical performance compared to traditional systems partitioning and cladding.
With the installation of ONDUTHERM® WALL not only ensures the compliance with the CTE; it is tested and certified in fire resistance, to loads, acoustic and thermal insulation,but the benefits are improved as the home energy savings the fields with resistance to loads and impacts, in addition to ease and speed up installation of the septum or cladding.
The installer benefits from the simple and fast application of the system, saving a lot of time and cost Compared to traditional systems. What's more, the result is a more efficient partition or cladding thanks to the breaking of thermal bridges what is achieved thanks to this patented system composed by tongue and groove bricks on all four sides.
Features and benefits
HIGH ENERGY EFFICIENCY FOR WALLS AND WALLS
The main component del sistema ONDUTHERM® wall is the Brick.
It is a square section block. (595 x 595 mm useful) tongue and groove at all four ends, that is made up of three elements:
- And core formed by a board OSB de 9 mm of thickness.
- Of the ends formed by the thermal and acoustic insulation.
ONDUTHERM bricks® WALL are offered in different types of insulation: EPS, XPS, rock wool and wood fiber, as well as in three different thicknesses (36, 60 Y 80 mm of insulation / 45, 69 Y 89 total mm).
These bricks are the soul of the system constructive for cladding and internal partition walls ONDUTHERM® WALL. Thanks to its unique and patented tongue-and-groove design on all four sides, thermal bridges in the partition wall or cladding are eliminated, improving the energy efficiency and thermal performance of the cladding or partition, in addition to being very easy to install and significantly improve installation times compared to traditional systems.
Example of the ONDUTHERM brick® WALL with rock wool insulation
Detail of the constructive section and dimensions of the ONDUTHERM brick® WALL (3 thicknesses)
VERY QUICK AND SIMPLE INSULATION OF WALL PLATES AND PARTITIONS (High installation performance)
Los bricks ONDUTHERM® WALL son light, very manageable and easy to apply. In fact, the ONDUTHERM system® WALL stands out for its extreme simplicity and efficiency of installation Compared to traditional cladding and interior partitioning systems.
For instance, in the execution of direct trasdosados they arrive at improve installation times 65% since in many cases it is not even necessary to install the verticals with metal profiles.
The bricks maintain perfect dimensional stability and they are only installed as semi-direct cladding or self-supporting cladding when the supporting wall does not maintain adequate leveling. In these cases, it is enough to brace the bricks with pieces of wood of the necessary width attached to the wall with plugs..
Do you want to change your preferences about how you receive this email see the following comparative video of the ONDUTHERM WALL system vs traditional system by clicking on the image:
ELIMINATION OF THERMAL BRIDGES IN SURFACES AND PARTITIONS
Los bricks ONDUTHERM® WALL are tongue and groove on all four sides so it offers a significant reduction in thermal bridges compared to traditional systems insulation of cladding and interior partitioning.
As you can see in the following thermography, thanks to the tongue-and-groove fit of the bricks, it is possible to eliminate thermal bridges generated with the traditional system, thus improving the thermal performance of the cladding and the dry interior partition and, therefore, increasing energy savings and energy efficiency of housing or the isolated space with ONDUTHERM® WALL.
Thermography of the ONDUTHERM system® WALL installed in cladding with plasterboard
Thermography of the traditional semi-direct cladding system with plasterboard
As can be seen in both thermographs, the ONDUTHERM system® WALL maintains constant insulation by eliminating thermal bridges that are produced due to the vertical metallic profiles of traditional insulation systems in cladding and interior partitioning.
PLASTERING AND PARTITIONS WITH HIGH RESISTANCE TO LOADS AND IMPACT (Better mechanical performance)
Thanks to OSB board core del brick ONDUTHERM® WALL these make up not only a continuous insulation and without thermal bridges in the cladding or partition, but also offer superior performance compared to traditional systems in resistance to eccentric loads (like shelves, furniture, etc.) and impact resistance.
The ONDUTHERM system® WALL has been tested in approved laboratories obtaining excellent results in tests of resistance to impacts and eccentric loads (no functional or structural deformations).
Hammer impact test in ONDUTHERM system® WALL of direct cladding with plasterboard
Impact test with hammer on traditional system of direct cladding with plasterboard
Resistance test to eccentric loads of the ONDUTHERM system® WALL in direct cladding with plasterboard
If you are interested, you may request tests del sistema ONDUTHERM® WALL to our Technical Department choosing the contact method you prefer in the following link: ONDULINE TECHNICAL DEPARTMENT
EASY PERFORMANCE OF GROOVES IN PLASTERING AND PARTITIONING (totally dry)
Again, thanks to its patented brick format made up of an OSB board core and two insulating ends, the ONDUTHERM system® WALL permite quickly and easily carry out the necessary grooves in the partition walls or cladding for installations of the house or building.
The chases can be made with a cutter or with a thermal knife, This second option being the most recommended for a more professional finish..
Detail of the roza and macaroni in the ONDUTHERM system® WALL
Detail of installation of electricity chases with the ONDUTHERM system® WALL in direct cladding
Installation detail of plumbing grooves with the ONDUTHERM system® WALL in drywall
APPLICATIONS
Application of the ONDUTHERM WALL system in direct cladding insulation in housing
INSTALLATION
The installation del sistema ONDUTHERM® WALL is one of his main advantages since it is very simple and fast compared to the traditional system of cladding and interior partitioning.
Las tools to use are the usual ones: a jigsaw to cut the bricks, a drill to make the holes in the wall and a cutter or thermal knife to make grooves in a clean and simple way.
The bricks must be placed at quincunx for a optimal mechanical behavior.
It is also recommended to place a vapor barrier sheet as ONDUTISS® BARRIER 110 o BARRIER REFLEX 130 on the bricks to improve your protection against internal condensation.
The installation of the plasterboard is faster and easier, this is placed directly on the bricks and reducing the number of bindings necessary for their attachment, in addition to be able to be fixed at any point of the cladding or partition thanks to the bricks de ONDUTHERM® WALL whose core is an OSB board of 9 mm.
INSTALLATION OF DIRECT TRANSDOSING
It is carried out direct installation of the bricks on the wall with rosettes (1 Ud. / m2) and without the need for metal profiles when the wall has a good level. See They manage to improve execution times up to a 65%.
Initial state of the wall to be plastered.
1º Installation of ONDUTHERM bricks® WALL directly on the wall, no need for metal guides.
Los bricks ONDUTHERM® WALL are mechanically fixed to the wall alternately (1 Ud. / m2).
2º Progress is made with the placement and fixing of the ONDUTHERM bricks® WALL to cover the complete cladding.
3º Once the bricks have been installed, it is recommended to place the ONDUTISS vapor barrier® BARRIER over these.
4º Once the ONDUTISS vapor barrier is installed® BARRIER proceeds to the placement of the lining of the backing with plasterboard plates or the desired finish.
Fixing the lining of the backing with plasterboard, or any other termination, It is made by screwing the screws to the core of the OSB board of the ONDUTHERM bricks.® WAL. These fixings can be made at any point, being advisable to follow a pattern of three vertical lines (two ends and one center).
5º In the case of cladding with plasterboard plates, the joints are treated according to the conditions recommended by the manufacturer..
5º Finally, the desired exterior finish is given to the cladding with plasterboard.
BIGMAT MORENO CONTINUES TO SERVICE ITS CUSTOMERS IN THE REGULAR HOURS
MONDAY FRIDAY: 7.30h-20.00h
SATURDAYS: 9.00h-13.30h
As published in the Official Gazette of the Junta de Andalucía (COLOR)
WE ARE CLOSE TO YOU